Jura Giga 5 - SOLVED When rinsing the coffee system it spits shot of water in to the waste bin

    • However, these motors only rust in this way if water gets onto the motor tappet on the brewing group side. If everything is fine with the brewing unit and its seals, this won't happen. Therefore (if you haven't already done so), completely overhaul the brewing unit with new seals and check that everything is leak-proof. Also check whether water/moisture on the heating side could damage the motor.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • BlackSheep schrieb:

      However, these motors only rust in this way if water gets onto the motor tappet on the brewing group side. If everything is fine with the brewing unit and its seals, this won't happen. Therefore (if you haven't already done so), completely overhaul the brewing unit with new seals and check that everything is leak-proof. Also check whether water/moisture on the heating side could damage the motor.
      Thanks BS, the brewing unit is completely rebuilt an I also applied silicone grease around the drainage moto shaft to prevent moisture intrusion.
      INFO-VIDEO

    Hilfe zur selbstständigen Reparatur von Kaffeevollautomaten (Jura, Delonghi, Siemens u.v.m.)