Suchergebnisse

Hersteller: Nivona | Typ-/Modell: CafeRomatica NICR 730 | ca. Baujahr: Unbekannt Hi, I repaired Nivona NICR 730 and then I turned on the machine I got in display test mode. I can't get out of this mode. Nivona gives no information about that. So I am stuck in TEST OK! and flashing screen. Maybe someone can help me? Mechanische Kentnisse vorhanden: NEIN | Elektrische Kentnisse vorhanden: NEIN | Messgerät vorhanden: NEIN

I solved this problem by heating up screwdriver end with a flame and touching screws several times to heat them up. And they unscrew easily cause they use threadlock paste to keep them in place. Using force is not an option cause I already damaged plastic slider and needed to cut it out with rotary tool. I have another problem with similar coffee machine. Tried with two infusers and they "legs" got broken. Checked microswitches seemed ok. So I found information in service manual about faulty com…

No the screw ead is fine but the screw thread is covered in adhesive glue. I can use force to unscrew but I will damage plastic slider.

Hersteller: DeLonghi | Typ-/Modell: ECAM 23.450.B Cappuccino | ca. Baujahr: Unbekannt Hi, I am sorry that I will talk in English but maybe someone will understand me and can help me. So the problem with this coffee machine and others from the same ECAM series is that I can't change transmission without removing trolley(072 7313212631 TROLLEY). Stupid manufacturer put adhesive on these two T20 screws and don't mention about that in any service manuals. These two T20 screws with big washers screws…