Jura GIGA X8c (G2) - General programming and control questions.

    • Jura GIGA X8c (G2) - General programming and control questions.

      Hersteller: Jura | Typ-/Modell: GIGA X8c (G2) | ca. Baujahr: 2018

      Project finished but many questions ...
      Machine is working great, very silent compared to the 1st generation.
      One les pump and thermoblock, extra ceramic valve instead of the selenoid block.
      Just a remark on use, touchscreen is complete shite, super sensitive not to mention the way they did the interface is also nothing to write home about.

      Q1: (this one I will answer)
      Who came up with the idea to hide power button under the flap by the scrolling wheel should be fired :thumbdown:
      Most idiotic design ever since to lift the stupid flap without long fingernails is borderline impossible.
      Q2:
      Anyone managed to find solution to use the g1 style grate with the g2 redesigned dredge drawer? I'm considering ordering the old style kit since the new one with additional plastic piece in the front sucks!
      Q3:
      How do I modify beverage settings for the rest of the drinks that are not on those 2 front pages? I can't figure this out. If I go to the beverage settings you can only pic from those 2 pages not from the scroll dial.
      Q4:
      Strangely enough the machine will give you warning to clean the frother but will not rinse it after certain period of time on its own, I find it strange since g1 has this option and you can enable or disable it.

      Thanks folks!

      Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA
    • Hi!
      I have a Giga 6 and may answer a few of your Q's / my ideas

      Q1: Imagine a company with designers, engineers and managment who sit at a table and decide: Yeah, the powerbutton should be under a cheap plastic hidden and only be accesible with long fingernails. Did they do drugs?

      Q3: Did you try in the App? On my Giga 6 i also cannot edit the scroll dial beverages. Maybe you can put them on a page (new beverage) and edit there? Have not tried though. I also never use the scroll dial.

      Q4: I hate this so much. When my wife takes a Cappucino 30 mins (dont know the exact time), ans i take an espresso it sometimes happens that the machine rinses itself right after i take my espresso. I had more then 10 espressi flooded because you cannot change / block the rinse timer. It just starts xx minutes after last milk-product. Maybe the Jura Team designed this in the same session as Q1?

      Maybe there will be an update one time?
      Greetings,
      Lukas

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Sm0ky_Barr3tt ()

    • At a professional machine like the Jura GIGA X8 it makes sense to hide the power button.
      Because there are often customers using the machine at a company or a cafe/bistro and they shouldn’t have a quick opportunity switching the machine off….

      Other answers I can’t give because of never touched a GIGA 6 ore a GIGA X of the second generation.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014
    • Sm0ky_Barr3tt schrieb:

      Hi!
      I have a Giga 6 and may answer a few of your Q's / my ideas

      Q1: Imagine a company with designers, engineers and managment who sit at a table and decide: Yeah, the powerbutton should be under a cheap plastic hidden and only be accesible with long fingernails. Did they do drugs?

      Q3: Did you try in the App? On my Giga 6 i also cannot edit the scroll dial beverages. Maybe you can put them on a page (new beverage) and edit there? Have not tried though. I also never use the scroll dial.

      Q4: I hate this so much. When my wife takes a Cappucino 30 mins (dont know the exact time), ans i take an espresso it sometimes happens that the machine rinses itself right after i take my espresso. I had more then 10 espressi flooded because you cannot change / block the rinse timer. It just starts xx minutes after last milk-product. Maybe the Jura Team designed this in the same session as Q1?

      Maybe there will be an update one time?
      Greetings,
      Lukas
      Thanks for the confirmation Lukas!
      Crazy choices indeed, I would take the G1 controls and interface any day over the G2.

      BlackSheep schrieb:

      At a professional machine like the Jura GIGA X8 it makes sense to hide the power button.
      Because there are often customers using the machine at a company or a cafe/bistro and they shouldn’t have a quick opportunity switching the machine off….

      Other answers I can’t give because of never touched a GIGA 6 ore a GIGA X of the second generation.
      BS, thanks for reply,
      don't know about that, if something goes sideways you should have the power button handy, same as on any other machinery or device.
    • Hello.

      A small café nearby uses a GIGA X3 GII. The owner complained to me that when it's busy and many drinks are dispensed in quick succession, the display fogs up so badly that the machine displays an error message. She would much prefer the older display with the dispensing buttons.

      That's all the hearsay I have about the second generation of GIGA machines, as I haven't had any hands-on experience with them myself.

      BS
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014
    • Hello.

      BlackSheep schrieb:


      A small café nearby uses a GIGA X3 GII. The owner complained to me that when it's busy and many drinks are dispensed in quick succession, the display fogs up so badly that the machine displays an error message. She would much prefer the older display with the dispensing buttons.

      That's all the hearsay I have about the second generation of GIGA machines, as I haven't had any hands-on experience with them myself.
      BS
      No doubt, buttons all the way, I had Z8 for short period of time and it behaved the same way, you can just hover with your finger over the screen and it would make selection. I seen video on YT where the Jura animation software has touch screen calibration and you can increase and decrease the sensitivity, they should have included this on the machine.
      INFO-VIDEO

    Hilfe zur selbstständigen Reparatur von Kaffeevollautomaten (Jura, Delonghi, Siemens u.v.m.)