Jura Giga 5 - Is there more than one Giga 5 revisions?

    • Jura Giga 5 - Is there more than one Giga 5 revisions?

      Hersteller: Jura | Typ-/Modell: Giga 5 | ca. Baujahr: Unbekannt

      Hi folks,
      I just acquired Giga 5 and comparing the internals to Giga X8c (3 pumps) there is only one pump inside the Giga 5.
      While browsing for parts here on Komtra there is 2 pumps listed for the Giga 5 (smaller 28W I presume steam and the large pump)
      I'm confused, is there 2 versions of the Giga 5?

      Thanks


      One more side question, all the brewing unit orings are clear silicone except the upper fluid exit nipple seal,
      that one is black and hard like a rock (nitrile seal)?
      Anyone seen that before?


      Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von Lifeisfun ()

    • In Germany (and probably all 230V Machines) have 2 pumps.
      I don‘t know exact whats with the GIGA 5 but the very similar
      GIGA X3 has only one pump in the 120V version…

      The clear o-rings are the newest version.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • I researched and actually the 120V version of the GIGA 5
      also has it only a pump and one flowmeter and does not
      have the milk coffee and power hot water functions.
      The steam heater also does not have 1080W but 1200W
      in the 120V version.

      This applies to the GIGA X3, GIGA W3 and GIGA 5. For the
      GIGA X7 (which is technically identical to the GIGA 5), I have
      no information about a 120V version. I also can't say whether
      there is even a 120V version of this. If so, it is not unlikely that
      it also applies to the GIGA X7.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • It seems that you now have a run at finding cheap Jura machines... :thumbup:

      Lifeisfun schrieb:

      is there 2 versions of the Giga 5?

      I can't give a definitive answer here. The GIGA 6 was referred to as
      GIGA 5 GII in the first documents of Jura and then came onto the
      market as GIGA 6 here, but I don't know what name it is on your
      market.
      As far as I know, the very first Z5 Chrom was called Z6 in North
      America. So it doesn't always have to be a 1:1 match on both sides
      of the sea...
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • Since the fabric hoses are not used over a large area in the GIGA 5,
      especially not in the heating area, there shouldn't be any comparable
      problems.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • Did you guys try to reveal the bottom from the Giga 5?

      Is this fairly easy or does this call for major disassembly?
      I like to clean it out since the previous owner was user only and did not give a F about cleaning.
      I found 4 screws on the water tank side and one under the ceramic valve, but it is still holding on.
      There must be more hidden somewhere or some clips.
      Any other tips?

      Admin: No pictures with unauthorized third parties - not even in excerpts

      Thanks

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Lifeisfun ()

    • Here, changes of the shortcut buttons can only be done by
      the Jura-Professional-Dealer with his Animation-Software.

      In Europe also there is no reset function or other option for
      the user to do anything by themselves.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • I am adding to my previous statement. It is also possible with the
      European professional GIGA-X devices to rename the products
      and assign the buttons yourself.

      This function is not available on the GIGA 5 "home". With the newer
      home GIGA 6 and GIGA 10 it is also possible to swap and rename
      the products on the display(s).
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • I am adding to my previous statement. It is also possible with that

      BlackSheep schrieb:

      European professional GIGA-X devices to rename the products
      and assign the buttons yourself.

      This function is not available on the GIGA 5 "home". With the newer
      home GIGA 6 and GIGA 10 it is also possible to swap and rename
      the products on the display(s).
      Why they "crippled" the firmware like that in the Giga 5 is beyond me.
      If they offered FW upgrade it would be worth to have it done by Jura service,
      but they could not expect people to drag it in for every change.

    • There is no firmware for the GIGA 5 with this Funktion.

      And the firmware is not crippled at the GIGA 5 (because
      this is the „oldest“ GIGA) the firmware of the GIGA X is
      expanded…
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014
      INFO-VIDEO

    Hilfe zur selbstständigen Reparatur von Kaffeevollautomaten (Jura, Delonghi, Siemens u.v.m.)