Jura Z8 - Power specification

    • Jura Z8 - Power specification

      Hersteller: Jura | Typ-/Modell: Z8 | ca. Baujahr: 2022

      I'm doing some searching about the power specs for the European versions of Z8 and Z10 and can't find the right answers ?(

      When I look up S8 it clearly states 220-240V 50-60Hz
      suprajaya.com/file/file_downlo…254758_JURA_S8_chrome.pdf
      That means it will be 100% compatible in North America since we get in kitchens 110V/ 15A/60Hz outlets
      that have 2 separate circuits Easily convertible to 220V/60Hz

      Anyone?

      Thanks

      Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA

      Dieser Beitrag wurde bereits 4 mal editiert, zuletzt von Lifeisfun ()

    • Z10 EA/SA/INTA: 220-240V 50hz

      Z8 15063: 220-240V 50hz
      Z8 15062: 230V 50hz
      Z8 15147: 240V 50 hz

      All information taking from the german user manual.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • You can check these things for yourself.

      Go to www.jura.com choose Europe and Germany
      than to "Menu" and "Support and Service" now
      "Bedienungsanleitungen" finally choose machine
      line and type.
      In the User manual its shown nearly at the end
      by "Technische Daten"

      For the S8 and S8 (EA) its: 220-240V 50hz
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • BlackSheep schrieb:

      You can check these things for yourself.

      Go to www.jura.com choose Europe and Germany
      than to "Menu" and "Support and Service" now
      "Instruction Manuals" finally choose machine
      line and type.
      In the User manual its shown nearly at the end
      by "Technical data"

      For the S8 and S8 (EA) its: 220-240V 50hz
      Thank you!
      Very interesting, I suspect that they just list whatever is appropriate for the country where they sell it.
      Doubt that they make different machines if both countries use same the voltage.

    • 220V, 230V, 240V - I think this may be not so critical because of the "normal" power line fluctuation - but I don´t know actually.
      Bigger problem seems to be the 50hz or 60hz - but I´m not a electronics engineer so it´s irrelevant what I assume... ^^
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • 220V, 230V, 240V - I think this may be not so critical - but I don´t know actually.

      BlackSheep schrieb:

      Bigger problem seems to be the 50hz or 60hz - but I'm not an electronics engineer
      so it's irrelevant what I assume... ^^
      Yes, voltage is no problem.
      With higher frequency AC motors will spin faster.
      It is generally easier on any electronic to go from 50 to 60HZ than the other way around.
      I'm considering ordering z10 EU version if the price is right, tempted by the cold brew option :)
      BTW the reason ordering the EU version is way cheaper parts for future repairs.
      We get screwed here on part pricing and availability here in NA.

    • The Z10 has only one heater - so the maximum powerconsumption is 1450W.
      But I think you will need a frequency converter even if you mange to get 220-230V.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • BlackSheep schrieb:

      The Z10 has only one heater - so the maximum powerconsumption is 1450W.
      But I think you will need a frequency converter even if you mange to get 220-230V.
      I have contacted Jura dealer that sells EU machines world wide (South Korea 220V/60Hz) and the frequency is apparently no issue. No converter needed. The model Jura South Korea sells is 15360.
      kr.jura.com/en/homeproducts/ma…15360/Specifications#tabs
      Not happy about the single boiler :(

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Lifeisfun ()

    • For testing I have imported older European E8 (with LCD and 3 buttons on left and right side of the screen)
      Working perfect on 240V here.

      I will ask additional question about it here so I don't have to open another thread.
      Is there way to see in the menu how many drinks was brewed? Can't find it anywhere in the menu. I downloaded several manuals for different versions but nowhere they show menu order where is what.

      Thanks.

    • The only way to see the brewed drinks by many of the
      newer Jura machines is the "J.O.E. Smartphone-App"
      in addition with the "JURA WiFi Connect" for the newest
      machines and the "Blutooth-Smart-Connect-Adapter" for
      the little older machines - you have to look what adapter
      fits with your actual machine.

      In the case of the E8: The "2018", and the "EA" needs
      Bluetooth - and for the "EB" it could be it may use both
      Bluetooth or WIFI - the compability-lists are not clear
      enough for me, because the "EB" appears on both
      compatibilty-lists, but by accesories for the "EB" only
      WIFI is shown...

      Here a Screenshot from my GIGA 5 - there ist the
      opportunity with J.O.E. additional to the machine
      menu.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • Indeed, will be interesting whats about the el. KV.

      There are no seperate parts for the display modul.
      You can only buy a complete modul. Search Google:
      "Jura 73936"
      The E8 are also too young to be cannibalized, so
      there also will be rather none parts from disassembled
      machines.

      The white hose is also be damaged. I hope this E8
      wasn´t too expensive...
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • Thank you, you never fail :)
      Unwrapped the gunk of that connection and testing the elbow plugging one end and creating suction on the other
      its holding without leaking, so I hope the problem is the hose connecting to it or poorly seated o-ring on the other end.
      The hose is fine it was just covered with that clear gunk (not silicone)

      The plastics are truly POS on all Jura machines I seen :(
      Will try to save it somehow.

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Lifeisfun ()

    • Lifeisfun schrieb:

      ...you never fail

      Don´t say that, but I´m right for many times.
      After all, it's been my hobby for over 20 years
      and "I've seen a lot" in those 21 years...

      Also I spend a lot of time in refurbishing used
      and defective parts to get them into usable
      spareparts for future use...
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014
      INFO-VIDEO

    Hilfe zur selbstständigen Reparatur von Kaffeevollautomaten (Jura, Delonghi, Siemens u.v.m.)