Jura A1 - sehr nasser Kaffeesatz

    • Jura A1 - sehr nasser Kaffeesatz

      Hersteller: Jura | Typ-/Modell: A1 | ca. Baujahr: 2017

      Hallo

      Zuvor hat meine A1-Maschine 1 von 3 Kaffees verpasst. Das System blockierte und das Wasser floss direkt in den Tank.
      Also habe ich alle Siegel gewechselt. Jetzt fließen alle Kaffees gut, aber sie sind sehr klar und der Kaffeesatz ist sehr nass!

      Hier ist ein Foto:

      komtra.de/forum/index.php/Atta…e94ec068472fade24feee295c

      Wenn Sie eine Idee haben? :
      - Montageproblem?
      - das Sieb wechseln?
      - Mühlenproblem?

      Danke für Ihre Hilfe

      Entschuldigung, ich spreche kein Deutsch. Also ist es Google Übersetzer

      I will try in English

      A few weeks ago my machine failed 1/3 coffee. Water flowed directly into the tray and no coffee came out of the spout.
      So I decided to dismantle it and change all the seals with the Komtra kit.

      Now she makes coffees but I find the coffee grounds very wet. And the coffee is very clear.


      I wondered if you had any leads?
      - reassembly problem?
      - change the sieve?
      - mill problem?
      - piston problem from the rema valve?

      Thanks for your help.

      Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA

      Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von Idfx43 ()

    • Unfortunately the Google-Translation ist so
      bad, that I don´t understand what was the
      problem an what was tryed to do.

      A problem seems to be the grinder - it grinds
      to coarse, but the much amount of water in
      the tray could be caused by the brewing-unit.

      My english is also bad - but perhaps its better
      than a google translation - hope your english
      is good enough for understanding my answer.

      BS
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • I will try in English :)

      A few weeks ago my machine failed 1/3 coffee. Water flowed directly into the tray and no coffee came out of the spout.
      So I decided to dismantle it and change all the seals with the Komtra kit.

      Now she makes coffees but I find the coffee grounds very wet. And the coffee is very clear.

      I wondered if you had any leads?
      - reassembly problem?
      - change the sieve?
      - mill problem?
      - piston problem from the rema valve?

      Thanks for your help.

    • Hello,

      as said, the coffeeground ist too course - here I can't
      see a direct relation to the work at the brewing unit.
      This is a grinder/mill problem.

      I don't think there ist a problem with the sieve or the
      crema-valve.
      But may be additional a problem with the brewing unit.
      Try to see if there is dripping water down from the brewing
      unit during the brewing process in the ground-tray.

      BS
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014
      INFO-VIDEO

    Hilfe zur selbstständigen Reparatur von Kaffeevollautomaten (Jura, Delonghi, Siemens u.v.m.)