Suchergebnisse
Suchergebnisse 1-4 von insgesamt 4.
-
Zitat von Tobias.L: „I think this will be the only option you have. “ 10 min job and machine work well now. Thanks again!
-
Zitat von Tobias.L: „I think this will be the only option you have. “ Okay, thank you for the support. I let you know if it works.
-
Zitat von Tobias.L: „It is (sometimes) possible to repair. If the power board is completely new, without a written EEPROM, it will not work. Jura Avantgarde EEPROM: Permanent cleaning or descaling “ Thanks for the quick reply. So it really is a programming issue. If I understand correctly, that means if I desolder the EEPROM from the old board and solder it onto the new one, it should start working.
-
Hersteller: Jura | Typ-/Modell: Bitte auswählen... Jura ena4 | ca. Baujahr: 2022 I have a Jura ENA4 machine where the transformer and the main board were burned out (the board couldn't be repaired). I ordered a new board and transformer from Aswo. Now when I turn the machine on, all three bean indicator lights turn on at first, then after a short time only the middle one stays on, and then the machine switches itself off. I tested the new board in another Jura ENA4 machine and got the same probl…
