Suchergebnisse

Yeah, none of these models and most brands don't sell here I did try to cross-reference as well, ended up by accident finding one from Capresso C-1300 Looks exactly the same as the one I took out from the E80. Another bonus is that both fuse and sensor is included and some other parts as well. There is never enough parts... Can't wait to get it! komtra.de/forum/index.php/Attachment/18874/

Well, I got mine now as well Thanks

Hi BS, yes, I saw this, they sell this as a kit here for "only" $300 Will not post the link but you probably know where Just crazy Any idea what can cause the damage? Do you see this often?

Hersteller: Jura | Typ-/Modell: E80 Impressa | ca. Baujahr: Unbekannt I got hands on like new old E80, and since the machine is in excellent shape I decided to fix it. This model is very old and the only problem is it has blown thermoblock (not fuse not the sensor, not the triac) I have to say I never saw machine before with blown heater, what can cause this? The thermoblock is no longer made, I'm sure you can find it fairly easy in Europe but I needed the 120V version, and even used the asking …

You are so lucky with the great Jura service in Europe!

Unter dem Relais, ganz rechts, war es verbrannt. Deswegen bestand eine leitende Verbindung, zwischen dem "Arbeitskontakt". Zitat von Tobias.L: „ “ Irgendeine Idee, wie das Wasser dorthin gelangt ist? Oder handelte es sich tatsächlich sogar um einen Wasserschaden? Danke

Zitat von harry owl: „Hallo dank Tobias geht sie wieder Aus frage mich nur wie Kaffeewasser da hinten auf die Platine kommt jetzt muß die Alufront nur noch lakiert werden da wie so oft die Schale in der Spülmaschine war und die rostige 9.4 Front gleich mit “ Es wäre toll, wenn Sie ein paar Bilder posten könnten, wo sich der Wasserschaden befand.Thanks

Zitat von RolandM: „Zitat von BlackSheep: „I hate solid water and have no idea about it “ In the country where I live we like it very much! Ice skating is very popular “ Zitat von RolandM: „Zitat von BlackSheep: „ “ “

Interesting Thanks!

One more question BS The chrome flap around the power P and rotary dial can be lifted, why? There is a pinhole on the back side and rubber cap on the front, what is this for? Thanks

Zitat von BlackSheep: „I hate solid water and have no idea about it However, it will probably be the case that the valve "F5" is only used for certain functions (e.g. descaling). As far as I know, it is not possible to implement regular machine operation via this tank if the solid water is not available. With some GIGA-X it is possible that the programming can be switched from solid water to tank operation - but only through the Jura service in the deep machine programming; the end customer cann…

I just sent an email request to Service Elektro Beutelschmidt eK and received a call back within minutes (!!!). Zitat von zockmaster: „No modification is necessary. As soon as the water connection (and if necessary the water drain) is closed, the machine does not draw any external water and runs on the water tank. Thanks to the company for the super fast response. “ Hi zockmaster! Got the same machine but can't get the machine suck water from the tank no matter what I do. Works perfect with exte…

While you put the top machine cover back on, the Zitat von BlackSheep: „Ventilation grills must be kept closed, otherwise it won't work. I had a hunch, which is why I described the flowmeter cables in such detail “ I did see that about the vents in another thread but it did not work for me since I played with the machine no lid attached and it jumped out of sync. When the machine was OFF the step motor was extended and it refused to retract on power on until I fake the switch status manually. Lo…

Here you see the motor retracted and that = flap closed

Zitat von BlackSheep: „Unfortunately there are no data from Jura which position of the valve is for filling the system. ........ Circuit board cm6b is for the flowmeter. Pins 1-3 are the connections for the hot water/coffee heating pump, 4-6 for the flowmeter for the steam heating pumps. ........ B.S “ That did it BS! Flowmeter connections were indeed swapped. THANKS! Now, new problem ERROR 15 The ventilation flap motor is making horrible sound but not moving the lever whatsoever. I'm positive t…

Thank you! I did mark everything as it was when I got it but it doesn't mean that the previous owner had it right after his "handy" work. Inlets and outlets 100% correct but will have to chase the wiring. Yes the flowmeters are/were clean like new. EDIT: Looks like the flowmeter connectors are swapped indeed! Will test it later

Hersteller: Jura | Typ-/Modell: Giga X8c Professional | ca. Baujahr: 2017 Purchased this machine couple weeks ago and it was properly emptied for shipping as described in the manual to avoid freezing. Had to replace all hoses with proper silicone hoses since someone used vinyl instead and they were all stiff and kinking. Now the machine is stuck on filling system over and over, can't even access the menu. The machine is taking water, all water ends in the dump drawer, none goes to the front spou…

youtu.be/MuZ_7lxzCa8?si=uZGu6UiiJ5EXDs5Z

NO THERE IS NOTHING TO REMOVE! Zitat von BlackSheep: „The parts are broken. It's something like laminated and comes off. I would do there nothing except being careful when using/touching. There too is no spare part than a new display box and this is priceless. “ Good to know! Extremely weird design Thanks!

Here are two pictures of what this “normally” looks like: Zitat von BlackSheep: „komtra.de/forum/index.php/Attachment/15914/ komtra.de/forum/index.php/Attachment/15915/ “ While reading all I can find about Giga, I just found these pics. My new to me x8c has this film peeling slightly one the left bottom edge (not the face side) Is this film permanent on these or did someone forgot to remove it when it was new and now it bonded it itself to the clear plastic? Very strange, never seen anything lik…