Suchergebnisse

Interesting, I just discovered the same on E75 that I have here with only 2309 preparations. Machine looks like new and no matter what coffee strength I select the puck will be only about 5 or 6mm when ejected from the machine. Yes you can hear that the run time of the grinder is different for every strength.

Zitat von BlackSheep: „No, I think it's something completely different. The 2mm LED seems to be Rather flat and like a yellow disk and does not have a classic LED housing. Here are a few better pictures: “ Great pics! Thanks! Yes, that is pretty much the same thing in different packages, those are available as well and generally produce more light, and applied over aluminum cooling plate. This type is used in light bulb assembly.

I suspect this is the style of LED used, still did not find yellow/cold white tme.com/ca/en/details/osybp27b…eds-rectangle/optosupply/

Zitat von _faabiii: „Howdy, Unfortunately I didn't take a picture, but it wasn't possible to loosen all of these nuts. I had it almost completely apart but couldn't get to it because of the remaining casing. I actually have almost all the tools there and it's still too narrow/angled. I just wanted to polish the parts, so I did it on site. Zitat von BlackSheep: „Hello, the ALU parts are each screwed on from the back with 3 nuts. Unfortunately, I can also tell you whether you can “just get to it”.…

Zitat von BlackSheep: „Hello, I have a few pictures, but they are a bit blurry - if that's not enough, I'll have to try to get them better: komtra.de/forum/index.php/Attachment/19166/komtra.de/forum/index.php/Attachment/19165/komtra.de/forum/index.php/Attachment/19167/ The LEDs are cast into the plexiglass holder. The voltages (I don't know where "+" was applied) are about 2V in one direction for "Amber" and about 3.2V in the other direction for "White". Maybe 1732 means 1.7V Amber and 3.2V Whit…

Zitat von BlackSheep: „Yes, it's a huge effort. The LEDs are simply junk on the machine and it will happen again sooner or later. Also These are not available anywhere as an individual spare part. The only thing that works if you don't have any working LEDs from a dismantling spout is to replace the entire spout for just under €200. I've looked everywhere and haven't found any suitable LEDs to install in the LED housing. It is a double LED that when the current flows in one direction, lights up …

@harry owl Unfortunately I have no idea what exactly this model is, I hope the pictures answer that: Zitat von hundstag: „komtra.de/forum/index.php/Attachment/19048/komtra.de/forum/index.php/Attachment/19049/ I hope the pictures are so meaningful! Sometimes the entire cappuccino thing flies away and sometimes the small part in the second picture that is actually screwed onto the machine also flies away. @Lifeisfun No, unfortunately the whole cappuccino-thing goes into space, sometimes including …

Hersteller: Jura | Typ-/Modell: E8 (G2) | ca. Baujahr: 2016 Zitat von StefanI: „ Hallo, nur mal eine grundsätzliche Frage: Was ist das eigentlich für ein Behälter, in den dieser Schlauch reingeht? Was hat er für eine Funktion? Es scheint innen so eine Art Labyrinth zu sein. ADMIN - Bild entfernt: DAS WAR EIN BILD MIT FREMDEN URHEBERRECHTEN. BITTE AN GESETZE HALTEN! Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA “ I presume you mean this? komt…

For one of the two it was amazing. Zitat von BlackSheep: „They only had the machine for 3 months They only had bottled water taken - which shows us that in this Under no circumstances should the water hardness be set to 0, but also the hardness of “bottled water”. determine and also set correctly in the device must… “ Bottled water can definitely contain way more minerals than regular tap water.

Manufacturer: Jura | Type/Model: E80 (G2) | approx. year of manufacture: 2021 Zitat von hundstag: „Hi everyone, My law is driving me a little crazy: I use a professional car cappuccino frother (item no. is probably 67693). For some time now she has been flying away while making latte macchiato. Sometimes it comes loose where it is attached, sometimes the part that is screwed on with the coffee spoon flies off with the nozzle. Is there a replacement part I can buy for it, or do I have to buy anot…

That's what I wanted to hear, if ain't broken don't touch it Thanks BS!

Zitat von BlackSheep: „komtra.de/media/files/Jura-C-E…izpatrone-A6551301140.pdf Normally it works as described in the instructions. Unfortunately (as you can see) they tend to leak at the head and so the screws are rusted and break off when you try to open them. There are no longer any replacement heating cartridges, so it makes more sense to try to remove dirt from the outside as best as possible and to use the device as long as it works. The heating cartridges also suffer from pitting over the…

The machine is probably from 2004. At that time, the drainage valve Zitat von BlackSheep: „magnets were only available in brown. This is black - so it has already been replaced and the cable may not have been reconnected. Jura has always delivered the heating cartridges (name in German: Heating cartridge) with complete cabling. It may be that there are also countries with 120V where grounding is required. For this reason it may be that the cable is connected but no longer goes on... “ That makes…

I guess "Little 120V tickle" never hurt anyone

Allowed here, but strange that inside the case they bond/ground those 2 parts together and that's it.

Thanks BS! Interesting, strange thing is there is no other grounding wire anywhere in the case and the machine here is using only 2 prong plug, without grounding wire. komtra.de/forum/index.php/Attachment/19011/ Also strange that someone did disconnect it from the drainage valve and just let it hang. Perhaps the electromagnet was replaced by someone sloppy. komtra.de/forum/index.php/Attachment/19010/

Hersteller: Jura | Typ-/Modell: E75 Impressa | ca. Baujahr: Unbekannt Quick question Today I opened E75 machine for cleaning and noticed disconnected ground wire just flapping in the case. The other side is connected to the thermoblock. Any idea where it should connect? Can't find any connection point anywhere. Thanks! komtra.de/forum/index.php/Attachment/19006/ Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA

Thank you Paul and BS! You are very helpful bunch!

Hersteller: Jura | Typ-/Modell: S9 One Touch Impressa | ca. Baujahr: Unbekannt Quick question about the grinder on S9. I got this machine in pieces and now in the final assembly stage I wonder how to set the grinder knob. The grinder markings are aligned on the grinder it self . Is this Finest, Middle or Coarse grind on the dial itself? Whoever took it apart took out the stick going from the grinder to the knob and did not mark it. Thanks Mechanische Kenntnisse vorhanden: JA | Elektrische Kentni…

Never mind, figured it out