Jura E8 (G2) - brewunit not returning to startposition after coffee?

    • Jura E8 (G2) - brewunit not returning to startposition after coffee?

      Hersteller: Jura | Typ-/Modell: E8 (G2) | ca. Baujahr: 2017

      Hello everyone,I have a problem that I really dont understand.I have a Jura e8. The brewing unit has been refurbished..When i turn on the machine, the brew-unit does its proces and ends in starting position. but when i make a cup of coffee, the brew-unit makes coffee, and throws the coffee puck in the wastebin. But after the brew-unit is finished the brew-unit doesnt stop in Start-position, but stops in the end position.I already replaced the decoder on the motor, but it didnt change anything.someone knows where to search?thanks!!

      Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von Amo ()

    • If the brewing chamber is closed, than its a fault by refurbishing,
      e.g. take some grease at places there may not be any grease
      (like curved track) or worn-out cuved tracks.
      If the big gear isn‘t in the right position, the electronic board
      will be broken.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • i dont understand. When i turn on machine, brew-unit stops in start-position.
      I rebuild the brew-unit again, but didnt see any isseus.. and still after making a cup of coffee, i get a coffee and the brew-unit drops the coffeepuck in the waste bin. Then the brew-unit goes up and all the way down (closed chamber) and stops.. then the machine is ready.

    • Stops the brewing unit in start position
      but the brewing chamber ist nonetheless
      closed or stops it in an totally wrong
      postion?

      If the total position is right but the chamber
      is closed, its a mechanical problem at the
      brewing unit. If it stops in a totally wrong
      position it will be a electronical problem
      which can‘t be solved by yourself.

      I don‘t know what is not to understand at
      this statement.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • BlackSheep schrieb:

      Stops the brewing unit in start position
      but the brewing chamber ist nonetheless
      closed or stops it in an totally wrong
      postion?

      If the total position is right but the chamber
      is closed, its a mechanical problem at the
      brewing unit. If it stops in a totally wrong
      position it will be a electronical problem
      which can‘t be solved by yourself.

      I don‘t know what is not to understand at
      this statement.
      you we're right.. replaced brew-unit. And now it works perfect.

      Still dont understand why.. but i am going to investigate this..
      Thanxx verry much again!!

    • This:
      it could be used some grease at places there may not be
      any grease (like curved track) or worn-out cuved tracks.

      Or its too heavy to move at all.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014
      INFO-VIDEO

    Hilfe zur selbstständigen Reparatur von Kaffeevollautomaten (Jura, Delonghi, Siemens u.v.m.)