Jura Z5 (G2) Impressa - Very loud drainage valve solenoid

    • Jura Z5 (G2) Impressa - Very loud drainage valve solenoid

      Hersteller: Jura | Typ-/Modell: Z5 (G2) Impressa | ca. Baujahr: 2022

      I have z5 here and the drainage valve solenoid is extremely noisy compared to S9 and S9 one touch.
      Is there any way to dampen it? sounds like a gunshot :)

      Thanks

      Mechanische Kenntnisse vorhanden: NEIN | Elektrische Kentnisse vorhanden: NEIN | Messgerät vorhanden: NEIN

    • There are several causes possible

      1. DV-Magnet is not installed correctly in the machine
      2. Brewing Unit ist not installed correctly in the machine
      3. The Brass-Sleeve of the DV-Magnet has loosened up

      If 3.: you can screw it in clockwise again. It is screwed in,
      with a fine thread.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • Hi

      ist there a result in this point?

      I only met you at another board talking about
      energy and "downsizing" the machine technology.

      BS
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • Hi

      BlackSheep schrieb:


      is there a result in this point?

      I only met you at another board talking about
      energy and "downsizing" the machine technology.

      B.S
      Waiting for some parts to arrive before I open it again so I can do that in one shot.
      Machine is working great so getting wired on espresso in the meantime now.

      Hehe, I did noticed you there BS, pointed out that you are the Jura specialist there :)
      INFO-VIDEO

    Hilfe zur selbstständigen Reparatur von Kaffeevollautomaten (Jura, Delonghi, Siemens u.v.m.)