Hersteller: Nivona | Typ-/Modell: NICR 839 - Typ 692 CafeRomatica | ca. Baujahr: 2017
Hi,
I have previously had a lot of problems with the milk frother, but it runs smoothly now. However, because it seemed like one of the auslauf nozzles was clotted, I had the machine disassembled and replaced some of the hoses to the auslauf from the cheramic valve. Also the one from the brewing unit.
as I already had the whole machine apart, I chose to take the drainage valve out and clean it properly. I’m pretty confident that everything was put back together as I took it apart.
However, after reassembling, there is no coffee coming out to the auslauf anymore, I can hear it dripping in the bottom dish.
So, what are the most likely causes for this?
In theory I could have switched the transparent hose from the brewer with the one going to the valve, but I’m pretty sure this is not it.
should I take the drainage valve apart again and make sure it runs smoothly?
Can I provide images or video of anything to make it clearer?
best regards,
Carsten
Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA
Hi,
I have previously had a lot of problems with the milk frother, but it runs smoothly now. However, because it seemed like one of the auslauf nozzles was clotted, I had the machine disassembled and replaced some of the hoses to the auslauf from the cheramic valve. Also the one from the brewing unit.
as I already had the whole machine apart, I chose to take the drainage valve out and clean it properly. I’m pretty confident that everything was put back together as I took it apart.
However, after reassembling, there is no coffee coming out to the auslauf anymore, I can hear it dripping in the bottom dish.
So, what are the most likely causes for this?
In theory I could have switched the transparent hose from the brewer with the one going to the valve, but I’m pretty sure this is not it.
should I take the drainage valve apart again and make sure it runs smoothly?
Can I provide images or video of anything to make it clearer?
best regards,
Carsten
Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA