Jura Impressa Z5 - no coffee, just steam and hot water

    • Jura Impressa Z5 - no coffee, just steam and hot water

      Hersteller: Jura | Typ-/Modell: Impressa Z5 | ca. Baujahr: 2012

      Sorry, I do not speak German,
      Hope you accept Englisch.
      My Z5 just give hot water and steam. Rinse / "Spülung" works fine in both pipes but machine will not make coffee..
      The ceramic valve is rebuilt and works fine.
      The heat exchanger is new
      The brewing group is new.

      The coffee making process starts but stops before the compression stage.
      Not enough water is pressed in to the brewer but electric valve works OK.
      No Error codes is displayed
      All vales is cleared and seams to work fine

      Where can the problem be??? ?(

      Hope for help
      Regards
      Olof

      Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA
    • Is enough coffee powder in the brewing unit?
      Otherwise the machine will make a break during
      brewing because of too less coffee powder.
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014
    • There are only two known possible reasons:
      1. not enough coffeepowder in the brewing unit
      2. the flowmeter recognizes no watermovement in the System

      independently of this a broken logic-board is also possible

      BS
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014
    • Okej, tack.
      Slutligen fick jag reda på att problemet var en lös kvarn som slipade kaffet till fint. Det resulterade i inte tillräckligt med kaffepulver i bryggfelet.
      Tack för hjälpen.

      Olof

      ADMIN:
      Google-Translator:
      Okay danke.Schließlich fand ich heraus, dass das Problem eine lose Mühle war, die den Kaffee gut mahlte. Dies führte zu nicht genügend Kaffeepulver im Brühfehler.

      Danke für die Hilfe
      .
      INFO-VIDEO

    Hilfe zur selbstständigen Reparatur von Kaffeevollautomaten (Jura, Delonghi, Siemens u.v.m.)