Hersteller: Jura | Typ-/Modell: ENA 9 | ca. Baujahr: 2018
Hello,
and sorry, I don't speak German (french is OK ! )
When powering on the machine,
the display shows "Press rotary".
When do so, and after warming up, I can ear (and see if cover removed) the infuser moving up and down,
then the water start flowing by the "back hole", meaning not the 2 usual coffee holes but the one that is on the back.
It continues to flow until the tank is empty,
if I fill it up, flowing continues ...
Any idea, any suggestion ?
I can provide whatever you would ask to help
Also,
I saw on a video that the front panel could be remove by removing a screw at the botton when the grille has been removed.
In my case, there is no screw but what seems to be a rivet.
I am ready to drill it to access the parts behind to clean them ...
any advices ?
thks for your answers ... and happy new year '19
p
Mechanische Kentnisse vorhanden: NEIN | Elektrische Kentnisse vorhanden: NEIN | Messgerät vorhanden: NEIN
Hello,
and sorry, I don't speak German (french is OK ! )
When powering on the machine,
the display shows "Press rotary".
When do so, and after warming up, I can ear (and see if cover removed) the infuser moving up and down,
then the water start flowing by the "back hole", meaning not the 2 usual coffee holes but the one that is on the back.
It continues to flow until the tank is empty,
if I fill it up, flowing continues ...
Any idea, any suggestion ?
I can provide whatever you would ask to help
Also,
I saw on a video that the front panel could be remove by removing a screw at the botton when the grille has been removed.
In my case, there is no screw but what seems to be a rivet.
I am ready to drill it to access the parts behind to clean them ...
any advices ?
thks for your answers ... and happy new year '19
p
Mechanische Kentnisse vorhanden: NEIN | Elektrische Kentnisse vorhanden: NEIN | Messgerät vorhanden: NEIN