Hersteller: DeLonghi | Typ-/Modell: ESAM 4500 Magnifica | ca. Baujahr: 2010
Hello all,
I replaced my thermoblock today and some of the O-rings that are around/in the piston.
But if I try the descale program or just want hot water, some water comes from the steam pipe (which is normal), but a lot of the water is coming out of the bottom of the piston. Here is a short video of what happens:
I checked for cracks anywhere, but nothings there. Did I use the wrong O-Rings? I think that’s causing the problem, but I’m not sure.
I looked in this manual for instructions what O-Rings I would need to buy.
komtra.de/media/files/DeLonghi…ocks-ESAM-A6531001140.pdf
The rings colored green, yellow and orange on page 13 are the rings I thing are causing the problem and needs to be replaced.
Are this the right O-Rings I need komtra.de/delonghi-ersatzteile…-kaffeevollautomaten.html?
Thank you, Leander
---------------------------------
Hallo,
Ich habe heute meinen Thermoblock und einige der O-Ringe, die sich im Kolben befinden, ersetzt.
Aber wenn ich das Entkalkungsprogramm versuche oder nur heißes Wasser möchte, kommt etwas Wasser aus dem Dampfrohr (das ist normal), aber ein großer Teil des Wassers kommt aus dem Boden des Kolbens. Hier ist ein kurzes Video von dem, was passiert:
Ich habe überall nach Rissen gesucht, aber nirgendwo.
Habe ich die falschen O-Ringe verwendet? Ich denke, das verursacht das Problem, aber ich bin mir nicht sicher.
Ich habe in diesem Handbuch nach Anweisungen gesucht, welche O-Ringe ich kaufen müsste.
komtra.de/media/files/DeLonghi…ocks-ESAM-A6531001140.pdf
Die Ringe grün, gelb und orange auf Seite 13 sind die Ringe, die ich verursache das Problem und muss ersetzt werden.
Sind das die richtigen O-Ringe komtra.de/delonghi-ersatzteile…-kaffeevollautomaten.html?
Vielen Dank, Leander
Mechanische Kentnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA
Hello all,
I replaced my thermoblock today and some of the O-rings that are around/in the piston.
But if I try the descale program or just want hot water, some water comes from the steam pipe (which is normal), but a lot of the water is coming out of the bottom of the piston. Here is a short video of what happens:
I checked for cracks anywhere, but nothings there. Did I use the wrong O-Rings? I think that’s causing the problem, but I’m not sure.
I looked in this manual for instructions what O-Rings I would need to buy.
komtra.de/media/files/DeLonghi…ocks-ESAM-A6531001140.pdf
The rings colored green, yellow and orange on page 13 are the rings I thing are causing the problem and needs to be replaced.
Are this the right O-Rings I need komtra.de/delonghi-ersatzteile…-kaffeevollautomaten.html?
Thank you, Leander
---------------------------------
Hallo,
Ich habe heute meinen Thermoblock und einige der O-Ringe, die sich im Kolben befinden, ersetzt.
Aber wenn ich das Entkalkungsprogramm versuche oder nur heißes Wasser möchte, kommt etwas Wasser aus dem Dampfrohr (das ist normal), aber ein großer Teil des Wassers kommt aus dem Boden des Kolbens. Hier ist ein kurzes Video von dem, was passiert:
Ich habe überall nach Rissen gesucht, aber nirgendwo.
Habe ich die falschen O-Ringe verwendet? Ich denke, das verursacht das Problem, aber ich bin mir nicht sicher.
Ich habe in diesem Handbuch nach Anweisungen gesucht, welche O-Ringe ich kaufen müsste.
komtra.de/media/files/DeLonghi…ocks-ESAM-A6531001140.pdf
Die Ringe grün, gelb und orange auf Seite 13 sind die Ringe, die ich verursache das Problem und muss ersetzt werden.
Sind das die richtigen O-Ringe komtra.de/delonghi-ersatzteile…-kaffeevollautomaten.html?
Vielen Dank, Leander
Mechanische Kentnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von GuessWh0oo ()