Siemens Surpresso TK58001 - compact - coffee grounds are wet after repair

    • Siemens Surpresso TK58001 - compact - coffee grounds are wet after repair

      Hersteller: Siemens | Typ-/Modell: Surpresso TK58001 - compact | ca. Baujahr: 2011

      Hi,

      I hope it's ok to write in English. If not let me know and I will try to compose this in German instead.
      I had an issue where the coffee machine did not deliver any coffee. So I ordered new gaskets and replaced them in the Brewing Unit and the Drainage Ventil.
      That did not solve the issue so I ordered a new DV and now the machine produces coffee.
      BUT the coffee grounds are now after the repair VERY wet and they are also no longer pucks but looks lite loose coffee.

      Any idea what might have happened?

      Mechanische Kentnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA

    • BlackSheep schrieb:

      Perhaps a asembly problem by the DV
      or something with the grinder.
      It seems that the machine didn´t produce
      enough coffee ground.
      I just don't see how the DV assembly could cause this?
      The DV did not look the same as the one I replaced, but it fits and the machine now produces coffee again.

      Is there anything in the Breüeinheit that I can have done wrong that can cause this?

      I did follow the video and don't think I made any mistakes.

      Thanks.

    • If there is a problem with the DV the drainage of the
      brewing unit will not work properly and therefore the
      coffeeground could be wet.

      How many coffeeground is in the brewing-unit before
      brewing (in percent of the filling of the brewing cylinder)
      when making a coffee in the strongest coffee adjustment?
      The coffeeground should have the fineness of normal
      household sugar - and fill the brewing cylinder not less
      than 80%.

      BS
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014

    • schizo schrieb:

      BTW, how do I check the amount of grounds in the brewing unit?
      You must search a way to see the filling of the
      brewing cylinder while the grinder is working.
      Perhaps without the machine-top or with some
      other thing taken away from the machine to
      see ist.

      BS
      Immer logisch und Schritt für Schritt vorgehen. Blinder Aktionismus kostet Zeit und Geld.
      Küche: Jura GIGA 5 Pianoblack-Chrom Bj: 2012
      Büro: [sJura GIGA X3 ALU Bj: 2014
      INFO-VIDEO

    Hilfe zur selbstständigen Reparatur von Kaffeevollautomaten (Jura, Delonghi, Siemens u.v.m.)