Melitta Caffeo Varianza F 57/0 - 102 - Kaffee kommt unter der Maschine heraus

Agapimos · 1. November 2017, 22:06

Hersteller: Melitta | Typ-/Modell: Caffeo Varianza F 57/0 - 102 | ca. Baujahr: 2014

Hallo zusammen. Ich weiß nicht, wo ich suchen soll, aber wenn ich Kaffee brühe, kommt er unter der Maschine heraus und nicht durch die Düse. Was kann falsch sein?

Mit freundlichen Grüßen
Cath

Mechanische Kentnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA

Da Eliot · 1. November 2017, 22:25

Hallo,
wenn die Maschine in einer Pfütze steht muß diese geöffnet werden. Dann kann man sehrwahrscheinlich sehen wo das Wasser rausläuft (undicht ist)
Gruß dE

Agapimos · 1. November 2017, 22:36

Denken Sie auch, die Frage ist nur, was falsch sein könnte. Alles andere funktioniert, heißes Wasser, Milchmotte, Mühle ..... alles außer dem Kaffee kommt falsch raus

Danke für Ihre Antwort trotzdem

Da Eliot · 1. November 2017, 22:50

Reden wir aneinander vorbei?
Läuft das Wasser beim Kaffeebezug in den Wasserauffangbehälter?
Gruß dE

Agapimos · 2. November 2017, 09:21

It's possible that I misunderstood you as I'm Swedish and using google translate. I try to write in English instead: My coffee machine works in every way except when I'm going to brew coffee. It grinds the coffee beans, squeezes the coffee, but then all coffee flows out under the machine, nothing comes out through the nozzle, not a drop. I have not opened the machine yet to see where it's going, but it's just the coffee that runs out. For example, if I start hot water, it flows through the correct nozzle, and then it does not leak at all.

Da Eliot · 2. November 2017, 11:49

does the coffee run into the drip tray or actually under the machine?

Agapimos · 2. November 2017, 12:13

A little bit in to the drip-tray, but most of it under the machine

I was thinking something has come loose inside, by the nozzle as it was after we moved it started to act like this......?

here is a video of it:

Da Eliot · 2. November 2017, 13:18

You have to change the drainage valve. For that you have to open the machine. See the repair manual here at the forum sponsor. it runs down the inner wall. Part II the shell and the rest under the machine.
Greetings dE

Agapimos · 2. November 2017, 14:03

Ok, so where do I search for the manual?

Da Eliot · 2. November 2017, 22:05

Da Eliot schrieb:

See the repair manual here at the forum sponsor.
Greetings dE

Reparaturanleitungen

BlackSheep · 2. November 2017, 23:15

Hello,

therefore coffee and not hot water flows out under the machine I don´t think
the problem is the draingevalve. I think there have to be a problem either at
the head of the brewing unit or at the following hoses or the coffee-nozzle.

BS

Agapimos · 3. November 2017, 10:37

Aha, well I will get back on here with the result when I can figure out how to open the machine

Thank you for taking the time to answer me :thumbup:

Cath

Agapimos · 3. November 2017, 12:06

Hmmmmmm, trying to open the top-lid on the machine, but can not find how to loose the last bit of it in the front, see the video......Hope someone knows how to do this

thank you once again

BlackSheep · 3. November 2017, 15:03

Hello,

in the middle of the top-lid should be the same clip as seen here by the torch:
komtra.de/forum/index.php/Atta…-IMG-20161102-212421-jpg/

BS

Agapimos · 3. November 2017, 16:13

Of course it is not that simple as a clip, I hoped it was, but it looks like a screw in the middle and that I have no idea how to get to......It is never easy

I have a picture, but dont know how to put it on here.......At least, here is a video on what I think is the screw......Look in the middle, the shiny "thing".....

BlackSheep · 4. November 2017, 08:43

Look here,

now I opend the Varianza that stands by me and waits on reparature for month.
You can see, that at the front is the same clip as at the left and right. Only at the
back (behind the watertank) there are two plastic-rivets to pull.

BS

Agapimos · 4. November 2017, 10:14

Ok....got it

Thank you so much

Agapimos · 4. November 2017, 13:33

Woop Woop!!! Got the top off, but now next question, I can see what is wrong inside

There is a hose that has been released from the inside of the nozzle, from where the coffee should come from, where it raises and lowers on the outside. Now, my question, how do I get to it in the easiest way, what do I need to remove and where are the screws placed?

Here is a video....again :saint:

Cath

BlackSheep · 5. November 2017, 08:50

Hello,

I think what I see ist the counterpiece for this:

The parts should look like this (the shown parts are almost similar and from a
Melitta Caffeo CI - the Varianza has only an elbow-flange at the hose-connect)
First in pieces

Second assembled

The red brushstroke shows the position of the retaining braket:

BS

Agapimos · 5. November 2017, 10:35

You are just super!!! Last thing I need to know is: Do I open from this side or from the top to get to put it back? Do I need to take of the front of the machine first as well?

Cath

Melitta Caffeo Varianza F 57/0 - 102 - Kaffee kommt unter der Maschine heraus

Melitta Caffeo Varianza F 57/0 - 102 - Kaffee kommt unter der Maschine heraus

Da Eliot schrieb:

Teilen

Tags

Kontakt

Shop Informationen

FRAGEN UND ANTWORTEN

Reparaturanleitungen

Zahlung

Versand

Social Media

RSS Feeds

Hilfe zur selbstständigen Reparatur von Kaffeevollautomaten (Jura, Delonghi, Siemens u.v.m.)