Suchergebnisse

Sorry for bringing back an old topic! Also sorry for not learning German yet Also many, many thanks for the link that describes the correct position of the cam-disk! It did help and saved me lots of troubles Anyhow, I finally started working on the coffee machine again and I've taken apart the whole brewing unit, cleaned it up and greased where there should be grease. It moves and works correctly and when I put the coffee machine together it doesn't give any faults at all. It even starts brewing…

Hi again, The drive, which is the brewing unit, correct? It is in the home position. But I'm not sure if I may have screwed up the position of the cam-disk. Do you know in what position that should be in "home" position? I have replaced all the micro switches in the machine to new ones, as I already have those kind of switches at home. Do you perhaps have any photo or drawing/exploded view of how the cam-disk and perhaps the white part on the other side of it should be positioned? As I had to re…

Hi BlackSheep, thank you for your answer! I got a bit upset that I couldn't get the machine to work so I continued with the machine. I thought I would "trick" the machine into another "error" so I removed the brewing unit and started clicking the switch for it. It worked, I tricked the machine into thinking that, "that" was the error at hand so it stopped blinking the other two lights. Now the machine comes on and starts to move the brewing unit. Unfortunately it doesn't seem to move it all the …

Hersteller: Siemens | Typ-/Modell: Surpresso TK54001 - compact | ca. Baujahr: Unbekannt Hi there, First off, I'm so sorry that I don't know German. I really hope you can accept me anyway. My problem is, I have a Siemens Surpresso TK54001 which started a few months ago blinking as if the brewing module was not inserted. I called Siemens and they told me what the problem was, it was the switch inside that started to give up. Alright, so I went in and replaced it and it worked perfectly since. Unti…