Suchergebnisse
Suchergebnisse 1-20 von insgesamt 28.
-
Hersteller: Jura | Typ-/Modell: Z8 | ca. Baujahr: 2017 hi all, I have a jura Z8, but the aluminium plate is oxidated.. and got white.. someone knows how to clean this and get the shiny aluminium back? See picture Thanx! Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA
-
Hersteller: Jura | Typ-/Modell: Z8 | ca. Baujahr: 2017 hi all, I have a jura Z8, but the aluminium plate is oxidated.. and got white.. someone knows how to clean this and get the shiny aluminium back? See picture Thanx!komtra.de/forum/index.php/Attachment/19590/komtra.de/forum/index.php/Attachment/19590/ Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA
-
Hersteller: Jura | Typ-/Modell: E6 (G2) | ca. Baujahr: 2016 Hello all, I have a jura e6 with an error 8 I refurbished the brewunit, but still getting error 8 After turning on machine it makes no sound of the motor, I replaced motor and decoder, but it didnt do anything When i turn on machine you can feel the motor giving bumps and try, but look like not enough power. Someone who had this issue before? I think its the logic.. Thanks all!! Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnis…
-
Zitat von BlackSheep: „Stops the brewing unit in start position but the brewing chamber ist nonetheless closed or stops it in an totally wrong postion? If the total position is right but the chamber is closed, its a mechanical problem at the brewing unit. If it stops in a totally wrong position it will be a electronical problem which can‘t be solved by yourself. I don‘t know what is not to understand at this statement. “ you we're right.. replaced brew-unit. And now it works perfect. Still dont …
-
i dont understand. When i turn on machine, brew-unit stops in start-position. I rebuild the brew-unit again, but didnt see any isseus.. and still after making a cup of coffee, i get a coffee and the brew-unit drops the coffeepuck in the waste bin. Then the brew-unit goes up and all the way down (closed chamber) and stops.. then the machine is ready.
-
i wrote in english.. I dont know how its translated in dutch
-
i had the same problem. See your logic board Water drops on the right side of the logic board caused it to burn.
-
Hersteller: Jura | Typ-/Modell: E8 (G2) | ca. Baujahr: 2017 Hello everyone,I have a problem that I really dont understand.I have a Jura e8. The brewing unit has been refurbished..When i turn on the machine, the brew-unit does its proces and ends in starting position. but when i make a cup of coffee, the brew-unit makes coffee, and throws the coffee puck in the wastebin. But after the brew-unit is finished the brew-unit doesnt stop in Start-position, but stops in the end position.I already replac…
-
Thanx Tobias, The j9.3 is working again.
-
i do understand what you was saying. Thanx for the link, that was my next question :-). I am going to read that and try to understand.. sometimes its difficult with google translate :-).
-
thanks tobias, I first replaced (ORIGINAL J9.3 LOGIC) 1 diode 1n5401 with the same one.. machine worked for 1 week perfect. suddenly same one died. I replaced all 4 with 1n5401 (MC) original is 1n5401 (LD).. but machine does nothing and after a few seconds it gives error 6. Do you think ITS because i used the (mc?) I still can place the eeprom back in the old j9.3 logic. If you say that the j9.2 logic is not gonna work Thanx!
-
Hersteller: Jura | Typ-/Modell: J9.3 Impressa | ca. Baujahr: 2015 Hi all, I have a j9.3 that is switching itself off. I replaced one diode and machine was fine for a week. And same diode died again. Now i have the exact same logic (same numbers etc) from a j9.2 i place this in the j9.3 but machine is doing goes on and gives 3 beeps and switches off. I think its the difference in the rom? So i replaced the memorychip from the j9.3 logic to the j9.2logic.. machine turns on. Does something but its …
-
Zitat von BlackSheep: „OKÉ, verander het met een nieuwe en kijk wat er dan gebeurt. BS “ thanx blacksheep.. i think they changes the temp sensor withbthe wrong one. Nu heb ik het vervangen door een nieuwe sensor en de machine is als NIEUW !! THANX
-
Zitat von BlackSheep: „The actual one ist the NTC I posted. This could be an old version. But the NTC at the photo doesn‘t look new. You wrote you took a new one. BS “ the previous owner told me they changed it because the machine came in with an error 2. After changing the thermosensor, he tried to make cappucino but with no luck. And then i buy it. But now you tell me that its an old one, then maybe i try amd change it with a new one. Thnx BS!
-
the one in the machine looks different. See picture in link. Picture. Do you know which one that is i have on te picture? Thanx
-
thnx blacksheep. I have replaced the thermoblock with the same one.. but still same problem! The thermoblock not getting hot enough.. i also checked with thermometer and this are results Hot water: 50degree Steam: 70 degree What i did so far: Replaced with new pump, still same problem. Replace thermoblock, still same problem. Replaced thermosensor because of error 2 (error 2 fixxed) but could be wrong sensor of dead on arrival. So only thing still can be problem is the Thermosensor.. think the n…
-
Zitat von BlackSheep: „Het lijkt er niet op dat de huidige temperatuur is toegestaan. “ that is what i think.. so it can be the boiler? Or is it possible that the thermosensor is not correct? can i measure the thermosensor? Do you know what resistance i have to measure? thanx
-
thamx blacksheep. I am going to check the temp sensor.. that could possibly be problem.. because pump is working.. If its the "auslaufventil" then i should see steam comming from the brewingroom.. that is not the case.. If i make milkproduct.. i see on screen that milk is filling, but nothing happening.. Replaced pump today, but still not working Youtube movie. Power of steam is not ok.. when making 2nd cup coffee then there is no steam at all. Thamx