Suchergebnisse
Suchergebnisse 1-20 von insgesamt 205.
-
Confirmed, water damage around the P button Will see if I can get it working again komtra.de/forum/index.php/Attachment/19636/ komtra.de/forum/index.php/Attachment/19637/
-
Thanks BS! In that case it's not worth it, I'll keep it for parts, not to mention Jura Canada would not touch machine not purchased in Canada. I'm tempted to try connecting another display unit from working machine but would hate to "fry it" as well. I will probably open the display unit and see what's happening inside. It's unfortunate there is no connector on it so you have to unplug it from the main board and pull the cable all the way back. I guess there is a way to repair them since someone…
-
Hersteller: Jura | Typ-/Modell: Giga 5 | ca. Baujahr: 2014 My Giga 5 repair moved step forward, but not the right way Managed to fix the main power switch, the machine will now turn ON (you can hear the relay click) The Red LED in the circle dial will start slowly blinking for about 20 seconds then the relay will switch OFF again. No display whatsoever. If I turn the power OFF and ON again this sequence repeats itself. It's unfortunate since otherwise the machine looks good, except some genius g…
-
Hersteller: Jura | Typ-/Modell: Giga 5 | ca. Baujahr: 2014 EDIT: Got it, top and bottom clips Another puzzle You Europeans sure know how to create puzzles when designing stuff! I got bad main power switch in Giga 5, took the power block out but can't figure out how to remove the power connector/switch from it. Don't see any retaining clips, nothing. I presume BS to the rescue? Thanks komtra.de/forum/index.php/Attachment/19633/ Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhande…
-
Zitat von BlackSheep: „The milk-hose is original and has no cracks or cuts? “ Yes, all brand new. Strangely enough those big bubbles start developing right after the frothing ends. Not enough protein in the milk? I don't know. Most of the foam disappears within 5 minutes
-
Zitat von BlackSheep: „ “ Thanks B.S.! I'll start with the orings and will see if that helps.
-
Hersteller: Jura | Typ-/Modell: Giga X8c Professional | ca. Baujahr: 2016 I got in x8c machine that suddenly started to make poor microfoam. The froth is full of large bubbles. Ordered complete new frother and exactly the same thing is happening. Where would you look now to solve this problem? What is the size of those 2 orings where the frother is attached? Is it possible that it takes some air in that area? Ideas? Thanks! Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: …
-
This should give you good idea youtu.be/1OpWNig6XpE?si=sgFnBmFgvharVb54
-
Jura Giga X8c Professional - Hissing sound after the brew cycle, similar to dripp style coffee maker
BeitragSo, I couldn't resist and took it apart again... The regulator in the machine does absolutely nothing, I screwed it in and out both ways and it did not change the problem one bit. I suspect it's faulty. Strangely enough the part is not even available on Komtra or I just could not find it.
-
Jura Giga X8c Professional - Hissing sound after the brew cycle, similar to dripp style coffee maker
BeitragZitat von BlackSheep: „Zitat von Lifeisfun: „Do you think the pressure reducer works differently than that? “ Sorry - I never have a machine with fix water in my hands. So I don't know the parts built in and also don't know what function seems to be correct or not... I think you shouldn't guess you should measure. Have in your mind that the fuc*** Sysko pumps let pass water even with a relatively low pressure… “ I'm surprised that it didn't leak before the Sysko pump let the water to go in. From…
-
Jura Giga X8c Professional - Hissing sound after the brew cycle, similar to dripp style coffee maker
BeitragZitat von BlackSheep: „Sorry, can‘t help. Never worked at a fix water machine. Something with the pressure reducer? Pressure should have only 0,2 bar! “ BS, do you think I should try descale fresh water connection? Perhaps the regulator would benefit from that if its frozen? The descaling never goes that way since it's using the internal tank.
-
Jura Giga X8c Professional - Hissing sound after the brew cycle, similar to dripp style coffee maker
BeitragI thought about it but when I open the supply valve just a bit it doesn't make any difference. Do you think the pressure reducer works differently than that?
-
Jura Giga X8c Professional - Hissing sound after the brew cycle, similar to dripp style coffee maker
BeitragWell, not sure what is the problem, all I know is the water enters the condenser and it steams and drains to the pan. Same when making coffee or after it does self cleaning when you turn it off. There is way more water in the pan after brewing than it was before this started. Help to solve this would be appreciated. Thanks EDIT: It just occurred to me that this probably started to happen when the machine was connected to fixed water supply. Disconnected it again used container as water source an…
-
Jura Giga X8c Professional - Hissing sound after the brew cycle, similar to dripp style coffee maker
BeitragThat makes, I'll take a look at it and if it doesn't help will make the "symptoms" video Thanks
-
Jura Giga X8c Professional - Hissing sound after the brew cycle, similar to dripp style coffee maker
BeitragHersteller: Jura | Typ-/Modell: Giga X8c Professional | ca. Baujahr: 2017 My X8c recently developed strange phenomena, after every brew there is for about 30 seconds hissing and popping very similar to what you hear at the end of the cycle using regular coffee maker. Then it can sit for hours completely quiet. After you make a coffee, same sound again. Ideas? Thanks Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA
-
Zitat von BlackSheep: „If I find time I take photos of the original Jura "V1", "V2", the two sorts of "V3" and the "HP" and "Aroma+". But I‘m not sure, that I have all Versions left in my fund… The "things" named "V5" have nothing to do with Jura. In my opinion, this is nothing more than rubbish. Because with "V5" the machines are operated outside of the specifications and also outside the specified programm setting options für coffee strength. “ I was looking hard for some pictures that would c…
-
The left one is Jura (V3) Zitat von BlackSheep: „the right one is Saeco (V5) The very old Jura V2 from the year 1999 or 2000 looks a little bit like the V5… “ Sir, you never disappoint! Thanks!
-
Hersteller: Jura | Typ-/Modell: SONSTIGES | ca. Baujahr: Unbekannt Can someone please ID these two burr sets? I believe the right one is V5 but I have no clue what is the one on the left. Thanks! komtra.de/forum/index.php/Attachment/19506/ Mechanische Kenntnisse vorhanden: JA | Elektrische Kentnisse vorhanden: JA | Messgerät vorhanden: JA
-
I did meet another Giga 5 user, and his machine (same fw) has exactly the same bug in the programming. To make double cup the default setting is loaded instead of the modified setting. Only option to have it fixed would be to send the machine to Toronto to have the fw upgraded. This service is not free even when this is clearly manufacturers fault. Not worth the money since just the 2 way shipping would be $250 I guess we will have to consider it as a feature from Jura.
-
Question was how to remove the front panel to access the pinch valve